*NOTICE -Please note that PNIE is available from the official website (https://www.nie-ecobank.kr/pnie/pnieOverview.do) in electronic format only.
2. Publication Charges
3. Preparing Your Submission
4. Editorial Policies and Ethical Considerations
5. Author Licensing
6. Publication Process After Acceptance
Thank you for your interest in PNIE. Note that submission implies that the content has not been published or submitted for publication elsewhere except as a brief abstract in the proceedings of a scientific meeting or symposium.
Once you have prepared your submission in accordance with the Guidelines, manuscripts should be submitted online at https://acoms.kisti.re.kr/journal/intro.do?page=logo&journalSeq=J000177
• At least two files should be submitted: the covering letter and the manuscript. The covering letter should be uploaded as a file not for review. Figures and tables should also be uploaded as separate files. Figures and tables should also be uploaded as separate files.
• Submissions should be double-spaced.
• The top, bottom and side margins should be at least 30 mm.
• All pages should be numbered consecutively in the top right-hand corner, beginning with the title page.
• MS Word format is preferred.
The submission system will prompt you to use an ORCiD (a unique author identifier) to help distinguish your work from that of other researchers.
For help with submissions, please contact:
- Homepage : https://www.nie-ecobank.kr/pnie/pnieOverview.do
- E-mail : firstname.lastname@example.org
- Phone : +82-41-950-5361
We look forward to your submission.
To submit and publish a manuscript, PNIE assesses charges by stages as following:
1. Submission: no charges.
2. Review: 20 USD is charged for the review process (waived until December 31, 2023.)
1) Publication fee of NIE researchers: USD 500
2) Publication fee of non-NIE researchers: USD 1,000
Publication fee is waived until December 31, 2023.
Submissions should be double-spaced. The top, bottom and side margins should be at least 30 mm. All pages should be numbered consecutively in the top right-hand corner, beginning with the title page.
• The entire article should be supplied as a single file; only figures and tables should be supplied as separate files.
• Figures must be supplied as high resolution .tif or .eps files. For more information, refer to 'Figures' later in this document.
• Specify the first author’s surname, the journal title and the manuscript number.
• MS Word format is preferred.
Papers are accepted for publication in the journal on the understanding that the content has not been published or submitted for publication elsewhere. This must be stated in the covering letter.
The covering letter must also contain an acknowledgment that all authors have contributed significantly, and that all authors are in agreement with the content of the manuscript. The role of each author should be written.
Authors must declare any financial support or relationships that may pose conflict of interest.
If tables or figures have been reproduced from another source, a letter from the copyright holder (usually the Publisher), stating authorization to reproduce the material, must be attached to the covering letter.
Pre-submission English-language editing
Authors for whom English is a second language may be recommended to have their manuscript professionally edited before submission to improve the English.
Style of the Manuscript
Spelling. The journal uses US spelling and authors should therefore follow the latest edition of the Merriam–Webster’s Collegiate Dictionary.
Units. All measurements must be given in SI or SI-derived units.
Abbreviations. Abbreviations should be used sparingly – only where they ease the reader’s task by reducing repetition of long, technical terms. Initially use the word in full, followed by the abbreviation in parentheses. Thereafter use the abbreviation only.
Trade names. Chemical substances should be referred to by the generic name only. Trade names should not be used.
Zoological nomenclature. All papers must conform to the latest edition of the International Code of Zoological Nomenclature. Upon its first use in the title, abstract and text, the common name of a species should be followed by the scientific name (genus, species and authority) in parentheses. Genus names should not be abbreviated at the beginning of paragraphs.
Genetic nomenclature. Standard genetic nomenclature should be used.
Nucleotide sequence data can be submitted in electronic form to any of the three major collaborative databases: DDBJ, EMBL or GenBank. It is only necessary to submit to one database as data are exchanged between DDBJ, EMBL and GenBank on a daily basis. The suggested wording for referring to accession-number information is: “These sequence data have been submitted to the DDBJ/EMBL/GenBank databases under accession number U12345.”
Addresses are as follows:
DNA Data Bank of Japan (DDBJ) http://www.ddbj.nig.ac.jp
EMBL Nucleotide Sequence Submissions http://www.ebi.ac.uk
The length of an article (including references, tables and appendices) should not exceed 20 printed pages for research papers and invited reviews.
Part of the Manuscript
Manuscripts should be presented in the following order: (i) title page, (ii) abstract and key words, (iii) text, (iv) acknowledgments, (v) references, (vi) tables (each table complete with title and footnotes), (vii) figure legends and (viii) appendices. Figures and supporting information should be supplied in separate files, if relevant. Footnotes to the text are not allowed and any such material should be incorporated into the text as parenthetical matter.
The title page should contain:
(i) a short informative title that contains the major key words. The title should not contain abbreviations;
(ii) a short running title of less than 40 characters;
(iii) the full names of the authors;
(iv) the author's institutional affiliations at which the work was carried out.
The present address of any author, if different from that where the work was carried out, should be supplied in a footnote.
Abstract and keywords
All articles must have a brief abstract that states in 250 words or fewer the purpose, basic procedures, main findings and principal conclusions of the study. The abstract should not contain abbreviations or references.
Up to six key words (for the purposes of indexing) should be supplied below the abstract in alphabetical order.
Authors should use the following subheadings to divide the sections of their manuscript: Introduction, Materials and methods, Results and Discussion.
The source of financial grants and other funding must be acknowledged, including a frank declaration of the authors’ industrial links and affiliations. The contribution of colleagues or institutions should also be acknowledged. Personal thanks and thanks to anonymous reviewers are not appropriate.
The Harvard (author, date) system of referencing is used (examples are given below). In the text, give the author’s name followed by the year in parentheses: Smith (2000). If there are two authors use 'and': Smith and Jones (2001); but if cited within parentheses use '&': (Smith & Jones 2001). When reference is made to a work by three or more authors, the first name followed by et al. should be used: MacDonald et al. (2002). In the reference list, references should be listed in alphabetical order.
In the reference list, cite the names of all authors when there are six or fewer; when seven or more, list the first six followed by et al. Do not use ibid. or op cit. Reference to unpublished data and personal communications should not appear in the list but should be cited in the text only (e.g. A. Smith, unpubl. data, 2005). All citations mentioned in the text, tables or figures must be listed in the reference list.
Authors are responsible for the accuracy of the references.
Sugumaran M, Saul SJ, Ramesh N (1985) Endogenous protease inhibitors prevent undesired activation of prophenoloxidase in insect haemolymph. Biochemical and Biophysical Research Communications 132: 1124–1129.
Chapman RF (1971) The Insects Structure and Function, 3rd edn. Elsevier, New York.
Chapter in a book
Driever M (1993) Maternal control of anterior development in the Drosphila embryo. In: Bate M, Aris AM (eds) The Development of Drosophila melanogaster, pp. 387–424. Cold Spring Harbor Laboratory Press, New York.
Hong KD, Kim LP (1997) The sources and migratory pathway of locusts in Korea. In: The 50th Annual Meeting of The Entomological Society of Korea, Seoul, Korea. Abstract A20.
References in articles
We recommend the use of a tool such as EndNote or Reference Manager for reference management and formatting. EndNote reference styles can be searched for here: http://www.endnote.com/support/enstyles.asp. Reference Manager reference styles can be searched for here: http://www.refman.com/support/rmstyles.asp.
Tables should be self-contained and complement, but not duplicate, information contained in the text. Number tables consecutively in the text in Arabic numerals. Type tables on a separate page with the legend above. Legends should be concise but comprehensive – the table, legend and footnotes must be understandable without reference to the text. Vertical lines should not be used to separate columns. Column headings should be brief, with units of measurement in parentheses; all abbreviations must be defined in footnotes. Footnote symbols: †, ‡, §, ¶, should be used (in that order) and *, **, *** should be reserved for P-values. Statistical measures such as SD or SEM should be identified in the headings.
Type figure legends on a separate page. Legends should be concise but comprehensive – the figure and its legend must be understandable without reference to the text. Include definitions of any symbols used and define/explain all abbreviations and units of measurement
All illustrations (line drawings and photographs) are classified as figures. Figures should be cited in consecutive order in the text. Figures should be sized to fit within the column (80 mm), intermediate (110 mm) or the full text width (167 mm).
Do not embed figures in the Word document – they must be supplied in separate files. Figures must be supplied as high resolution (at least 300 d.p.i.) files, saved as .eps or .tif. Line figures should be supplied in .eps format as at least 600 d.p.i. For very simple line figures, .xls and .ppt files will be accepted. Combination figures (with an image and text) should be in .eps format as at least 600 d.p.i. They can be supplied as .tif files but if so should be at least 600 d.p.i. and line work should not appear jagged. Line figures should be supplied as sharp, black and white graphs or diagrams, drawn professionally or with a computer graphics package. Lettering must be included and should be sized to be no larger than the journal text.
Magnifications should be indicated using a scale bar on the illustration.
Appendices will be published after the references. For submission they should be supplied as separate files but referred to in the text.
Supporting information is information that is not essential to the article but that provides greater depth and background. It is hosted online, and appears without editing or typesetting. It may include tables, figures, videos, datasets, etc.
Data Sharing and Data Accessibility
The journal encourages authors to share the data and other artefacts supporting the results in the paper by archiving it in an appropriate public repository. Authors should include a data accessibility statement, including a link to the repository they have used, in order that this statement can be published alongside their paper.
The acceptance criteria for all papers are the quality and originality of the research and its significance to our readership. Except where otherwise stated, manuscripts are peer reviewed by two anonymous reviewers and the Editor. Final acceptance or rejection rests with the Editorial Board, who reserves the right to refuse any material for publication. Authors should abide by the decision made, and if asked to submit a revised version of their manuscript, do so by the designated due date.
Manuscripts should be written in a clear, concise, direct style. Where contributions are judged as acceptable for publication on the basis of scientific content, the Editor and the Publisher reserve the right to modify typescripts to eliminate ambiguity and repetition and improve communication between author and reader. If extensive alterations are required, the manuscript will be returned to the author for revision.
Any experiments involving animals must be demonstrated to be ethically acceptable and where relevant conform to national guidelines for animal usage in research.
In taxonomic papers, type specimens and type depositories must be clearly designated and indicated. Authors are required to deposit the name-bearing type material in internationally recognized institutions (not private collections).
When the research is carried out in areas for which research permits are required (e.g. nature reserves), or when it deals with organisms for which collection or import/export permits are required (e.g. protected species), the authors must clearly detail obtaining these permits in the Acknowledgments section.
All listed authors must have contributed significantly to the paper, and all authors must be in agreement with the content of the submitted manuscript and must approve of the final version.
Conflict of Interest
The journal requires that all authors disclose any potential sources of conflict of interest. Any interest or relationship, financial or otherwise that might be perceived as influencing an author's objectivity is considered a potential source of conflict of interest. These must be disclosed when directly relevant or directly related to the work that the authors describe in their manuscript. Potential sources of conflict of interest include, but are not limited to, patent or stock ownership, membership of a company board of directors, membership of an advisory board or committee for a company, and consultancy for or receipt of speaker's fees from a company. The existence of a conflict of interest does not preclude publication. It is the responsibility of the corresponding author to review this policy with all authors and collectively to disclose with the submission ALL pertinent commercial and other relationships.
This journal is a member of the Committee on Publication Ethics (COPE). Note this journal uses iThenticate’s CrossCheck software to detect instances of overlapping and similar text in submitted manuscripts.
Reproduction of Copyright Material. If excerpts from copyrighted works owned by third parties are included, credit must be shown in the contribution. It is the author’s responsibility to also obtain written permission for reproduction from the copyright owners.
Accepted article received in production
When your accepted article is received by the production team, you (corresponding authors) will receive an email asking you to login to sign a publication license at this point.
Authors will receive an e-mail notification with a link and instructions for accessing HTML page proofs online. Page proofs should be carefully proofread for any copyediting or typesetting errors. Online guidelines are provided within the system. No special software is required, all common browsers are supported. Authors should also make sure that any renumbered tables, figures, or references match text citations and that figure legends correspond with text citations and actual figures. Proofs must be returned within 48 hours of receipt of the email. Return of proofs via e-mail is possible in the event that the online system cannot be used or accessed.